Palisade fences

 
Gates

Posts
Security

 
   
This kind of fencing is especially suitable for properties needing stability, security and protection. Vertical palisades are rectangular (or round) hollow tubes, which pass through the horizontal rails with spacing at 140 mm between centers and are then welded. The palisades protrude 175 mm above the top rail and 125 mm below the bottom rail, making it practically impossible to remove individual palisades. The top of each palisade is cut at a 45° angle, which makes climbing over them difficult.
Gates 
We produce both swing and sliding gates. One of the main benefits of sliding gates is that they save on valuable opening space and can operate perfectly even where ground is not level. Despite their robust design, they run smoothly and quiet on nylon wheels.
         

Single gates are supplied with a key lock as standard, either a LOCINOX® lock with durable stainless steel mechanism, or a built-in lock in the hollow frame. A LOCINOX® stop clamp with rubber damper for comfortable and silent closing is mounted to a gate post. Double gates are supplied with a centre gate stop and a LOCINOX® drop bolt clamp, if automatic opening devices are not installed.
     
Posts

The posts are square hollow tubes, made in different sizes: 60x60mm, 80x60 for fences and 100x100mm, 120x120mm and 150x150mm for gates, depending on the height and width of gate.
Posts come complete with welded-in threaded bed places for adjustable hinges and steel or plastic caps mounted on the top.
Posts allow for 800mm in the ground as standard. Alternative posts are available with base plates for bolting onto concrete bases.

Security
For higher security we offer extras such as: barbed wire, razor barbed wire, bent top ends of vertical pales, sharp spikes welded in angle, and “security combs” or rotating spikes.